Filling The Solution Tank - Ice i20NBL+ Operator's Manual

OPERATOR MANUAL
The machine is equipped with a hose fill-port (see machine components, item #18) at the rear of the machine,
and a bucket fill-port (see machine components, item #7, see Fig. 9) located under the recovery tank.
Before accessing the bucket fill-port make sure that the recovery tank is empty.
Fill the solution tank to the "60L" level on the solution tank sight gauge. When using the bucket fill-port, stop
filling when the level reaches the bottom edge of the fill-port.
NOTE:
When filling the solution tank with a bucket, make sure that the bucket
is clean. Do not use the same bucket for filling and draining the machine.
WARNING:
Do not put any flammable materials into solution tank. This can cause an
explosion or a fire.
Only use recommended cleaning chemicals.
Contact your janitorial supply distributor for recommendations on proper
chemicals.
Figure 9
20

Filling the Solution Tank

i20NBL+ / i20NBTL+/ i20NBTL+-OB / i24BTL+