Battery Charging - Ice i20NBL+ Operator's Manual

WARNING:
Fire or explosion hazard. Keep sparks and open flame away.
Keep battery compartment propped open when charging.
Use only ICE supplied or approved batteries charger, use of unapproved charger may
cause damage to the batteries and machine.
Batteries charger specifications:
• Applicable to charging Lithium-ion
batteries
• Automatic shut off circuit
• Output current of 15 Amps
• Output voltage of 24 Volt
Figure 3
Figure 4
NOTE:
The machine will not operate while charging.
i20NBL+ / i20NBTL+ / i20NBTL+-OB/ i24BTL+
OPERATOR MANUAL

Battery Charging

1. Place machine in a well ventilated
area.
2. Turn the machine off.
3. Connect the charger's AC power sup-
ply cord (see machine components,
item #34, and Fig. 3 and 4) to a prop-
erly grounded receptable.
4. Prop up the recovery tank by the sup-
port stand (see machine components,
item #4, and Fig. 5) for ventilation
when charging.
5. The charger will automatically be-
gin to charge and will automatically
shut off once the batteries are fully
charged.
(See Fig. 6)
6. Upon completion of charging, discon-
nect the AC power supply cord.
17