Switching On The Measuring Device; Establishing A Connection Via Smartblue (App); Further Information - Endress+Hauser Liquiphant FTL64 Operating Instructions Manual

Commissioning
7.2

Switching on the measuring device

During the power-up time, the device output is in the safety-oriented state, or in the alarm
state if available:
• For electronic insert FEL61, the output will be in the correct state for a maximum of 4 s
after powering up the device.
• For electronic inserts FEL62, FEL64, FEL64DC, the output will be in the correct state for a
maximum of 3 s after powering up the device.
• For electronic inserts FEL68 NAMUR and FEL67 PFM, a functional test is always performed
upon powering up the device. The output is in the correct state after a maximum of 10 s.
7.3

Establishing a connection via SmartBlue (app)

 For more information, see Operating Instructions.
7.4

Further information

Further information and the documentation currently available can be found on the
Endress+Hauser website:
40
www.endress.com → Downloads.
Liquiphant FTL64
Endress+Hauser