Liquiphant FTL51B
4.1.6
Weld-in adapter with leakage hole
Weld in the welding neck in such a way that the leakage hole is pointing downwards. This
enables any leaks to be detected quickly.
10
Weld-in adapter with leakage hole
4.2
Mounting the measuring device
4.2.1
Required tools
Open-ended wrench, Allen key
4.2.2
Installation
Horizontal installation in vessels
Align the tuning fork with the marking
316L/G1
11
Markings to align the tuning fork
Use the marking to align the tuning fork in such a way that medium can run off easily and
deposit buildup is avoided.
Markings may include the following:
• Material specification, thread description or circle on the hexagonal nut or on the weld-in
adapter
• The II symbol on the back of the flange or Tri-Clamp
Endress+Hauser
Mounting
A0039230
A0039125
13