Installation
13
Screwing in the device
Aligning the cable entry
1.
2.
14
Housing with external locking screw
The locking screw is not tightened when the device is delivered.
1.
Loosen the external locking screw (maximum 1.5 turns).
2.
Turn the housing, align the cable entry.
Avoid moisture in the housing, provide a loop to allow moisture to drain off.
3.
Tighten the external locking screw.
4.3
Sliding sleeves
See the Operating Instructions
4.4
Post-installation check
Is the measuring device undamaged (visual inspection)?
16
Liquiphant FTL64
3.
4 0.7 Nm
Endress+Hauser
A0042423
A0042355