Fujitsu 420D User Manual page 64

S e c t i o n T h r e e
Table 3-2 Options and Defaults for the IDE Adapter Submenu
Parameter Options
*Transfer Mode: Standard, Fast PIO 1 –
Fast PIO 4.
32 Bit I/O: Enabled; Disabled.
56
Default
When one of the preset combinations is
selected the value set is displayed but cannot
be changed from the screen. This field can
only be changed from the screen when Type:
is selected as User.
Enabled
C A U T I O N
A bootable CD-ROM may have either a
floppy disk form a t or a h a rd drive form a t.
When the bootable CD-ROM is used the
drive allocations change automatically, this
does not re q u i re changing the BIOS setup. If
a floppy disk format CD-ROM is used the
CD-ROM becomes Drive A. If a hard drive
f o rmat CD-ROM is used the internal hard
drive becomes Drive D and the CD-ROM
becomes Drive C and all other drive designa-
tions shift as necessary. The boot sequence
then follows the changed allocations.
Description
Selects the data movement method for
the hard disk.
Enables or disables 32 bit data t ransfers.
C A U T I O N
Be careful of the operating environment
when booting from a CD-ROM or you
may overwrite files by mistake.