Fujitsu 420D User Manual page 20

S e c t i o n O n e
P O I N T
If your system comes with Windows 95
only, you will find a Recovery CD-ROM
packet in your accessories box. Please
store the packet in a safe place in case
there is a loss of data. (See Restoring
Your Pre-installed Software from CD-
ROM on page 114.)
License of Windows 95
Read carefully and then click on the N e x t >
Button.
License Agreement
Read the agreement carefully. You can scroll
through the text using the Integrated TouchPad
Pointing Device to activate the scroll bar or use
the up arrow and down arrow
move up and down the text one line at a time.
When you finish reading simply point and click
to accept or reject the terms of the agreement
and then click on the N e x t > Button.
12
P O I N T
If you reject the terms of the license
a g reement the operating system setup will
a b o rt and shutdown your notebook.
When you turn on the system the next
time, it will begin the Setup process again.
Certificate of Authenticity
Look in the box that your notebook came in and
you wi ll find a Wi n dows 95 Certi fic a te of
Aut h en ti c i ty and a Wi n dows 95 Us ers manu a l .O n
the certi fic a te and also on the back of the manu a l
you wi ll find a bar- code with a nu m ber above it.
These nu m bers should be the same. Th ey are yo u r
produ ct code and the nu m ber you should en ter
on the Certi fic a te of Aut h en ti c i ty screen . Wh en
you have en tered the nu m ber ex act ly as shown
t h en cl i ck on the Next> But ton .
keys to
C A U T I O N
If your system came with a choice of oper-
ating systems, you will need to make back
up disks. (See Create System Disks page
1 3 . )
*Windows Version
To sel ect Wi n dows for Work groups point and
cl i ck on the C h a n g e But ton . To sel ect Wi n dows
95 point and cl i ck on the N e x t > But ton .
( If you sel ect Wi n dows 95 you wi ll go direct ly
to the Con fig u ring the Com p uter Screen . )
*Operating System Choice
To select Windows for Workgroups point and
click on the Windows for Workgroups selection
and then point and click on the N e x t > Button.
To select Windows 95 point and click on the
Windows 95 selection and then point and click
on the N e x t > Button.
Configuring the Computer
If you have a unit with only Windows 95 or
have selected Windows 95 this screen will
appear when Windows 95 is ready to install.
(If you purchased a LifeBook 400 Series which
only comes with Windows 95 this screen will
appear immediately after the Certificate of
Authenticity Screen.) You may be prompted for
time zone and printer. You do not need to select
a printer at this time.