Installing A Theft Prevention Lock; Optional External Installation Of A Floppy Disk Drive - Fujitsu 420D User Manual

S e c t i o n F o u r

Installing a Theft Prevention Lock

A physical security system lock can be installed
on the right side of your notebook. (See Figure
1-7 on page 7 for the location of the lock slot.)
Simply insert the key end of the security system
in the slot, rotate 90 degrees and lock.
Figure 4-5 Optional External Floppy Disk Drive Adapter
82
Wide side of
Connector down
Connector
Release Buttons
Floppy Disk Drive
Figure 4-6 Installing an External Floppy Disk Drive
Optional External Installation of
The Floppy Disk Drive
To connect the floppy disk drive externally, via
the connector on the left side of your notebook:
1. Close all files and exit all applications
2. Turn o power to your notebook, close the
display and remove the AC Adapter.
(See page 9 for more information.)
To Install
3. Insert the Floppy Disk Drive into the
optional External Floppy Disk Drive Adapter
4. Open the External Floppy Disk Drive Adapter
Connector cover, (see Figure 1-6 on page 6),
by gently pulling on the top of the cover and
tilting it down.
5. Align the connector of the Floppy Disk
Adapter
Adapter with the connector towards your
notebook with the wide side down.
6. Insert the connector of the adapter into the
connector on your notebook and push in
firmly until it clicks.
C A U T I O N
Be careful aligning and seating the
Floppy Disk Drive in the Adapter. If the
fit is incorrect you may damage the
Floppy Disk Drive or the External Floppy
Disk Adapter. If the Drive does not move
easily, remove it and check for dirt or for-
eign objects. It will require a firm push to
latch the drive in place.