Restarting The System - Fujitsu 420D User Manual

S e c t i o n T w o
Remove any CD and/or floppy disk.
Turn o your notebook using the Power
Switch.
Close the notebook lid.
Disconnect the AC Adapter.
Remove the battery and store it separately in
a cool dry place.

Restarting the System

Wh en you wish to re s t a rt the sys tem be su re that
you fo ll ow the appropri a te procedu re for the
opera ting sys tem . The procedu res are as fo ll ows :
Windows 95
1.Go to the Start Button Menu.
2. Click on
Restart the computer?
3. Verify that Restart the computer?
is selected and click on YES. Windows will
shutdown and restart your notebook.
NOTE: You may also select Shut down the
c o m p u t e r ? and once the Power is o for 10
24
seconds or more you can restart your notebook
with the Resume Button. You may also select
Shut down the computer? a nd once the
Power is O turn the Power Switch to O for
10 seconds or more and then turn the Power
Switch to On. These alternative methods are
not recommended.
P O I N T
In Windows 95 pressing the C t r l+A l t+D e l
keys simultaneously triggers the Shutdown
submenu of the Start Button Menu.
Windows 3.1
1. Save all data.
2. Exit all applications.
3. Exit Windows.
4. When the MS-DOS prompt appears press the
Ctrl+Alt+Del keys simultaneously. Or, when
the MS-DOS prompt appears put the Power
Switch in the O position for 10 seconds or
more and then put the Power Switch in the
On position.
MS-DOS
1. Save all data.
2. Exit all applications.
3. When the MS-DOS prompt appears press the
Ctrl+Alt+Del keys simultaneously. Or, when
the MS-DOS prompt appears put the Power
Switch in the O position for 10 seconds or
more,and then put the Power Switch in the
On position.
C A U T I O N
Turning off the Power Switch without
exiting Windows 95 may cause an error
when you start the next time. Turning
the power to On when it has been Off
for less than 10 seconds may also cause
an error when you start the next time.