Fujitsu 420D User Manual page 98

Keyboard Removal
Tabs
Figure 4-1 Raising the Keyboard
U s e r I n s t a l l a b l e
C A U T I O N
Do not use the keys to lift the keyboard.
They could be damaged.
C A U T I O N
Be careful not to pinch the flat cable.
C A U T I O N
Do not attempt to install or remove a
RAM Module if the notebook has been
recently used. The surface areas under
the keyboard can be very hot, and may
injure you.
C A U T I O N
The RAM Expansion Module can be
severely damaged by electro-static dis-
charge (ESD). Be sure you are properly
grounded when installing the module.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
F e a t u r e s
7. Align the connector edge of the RAM
Module with the connector slot in the com-
partment. The notch on the module should
be on the right with the part side up and the
connector pointing towards the back of the
notebook and aligned with the notch in the
connector. (Figure 4-2.)
Figure 4-2 Installing the RAM Module
77