Nickel Metal Hydride Battery Pack - Fujitsu 420D User Manual

To Remove
3. Press firmly on the sides of the adapter con-
nector next to the body of your notebook.
4. Pull the connector free.
5. Close the connector cover by tilting up and
pressing until it latches.
6. Slide the release latch on the side of the
Adapter toward the bottom of the Adapter.
Note: Finger ridges are on the bottom of the
Floppy Disk Drive module.
7. Slide the Floppy Disk Drive out of the
Adapter.
C A U T I O N
This adapter is designed only for use with
a floppy disk drive. Do not connect any
other device or you could damage the
device or your notebook.
U s e r I n s t a l l a b l e

Nickel Metal Hydride Battery Pack

There is a chamber in the bottom of the your
notebook which contains the Nickel Metal
Hydride Battery Pack. Additional Nickel Metal
Hydride Battery Packs or Lithium ion Battery
Packs are available as options. A charged
Battery Pack can be exchanged for a discharged
one for additional operating time.
In addition,any battery should be removed if
your notebook is not going to be used for an
extended period of time.
C A U T I O N
Removing or installing the Battery Pack
with the power on may cause data loss,
electric shock and/or damage to the
notebook or the battery.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
F e a t u r e s
Finger Ridge
To Remove the Battery Pack
1. Save all files and close all applications.
2. Turn o the Power Switch and remove the
AC Adapter.
3. Slide the Battery Eject Button on the left side
of the notebook toward the bottom of the
notebook.(Figure 4-7.)
4. Slide the battery towards the front of your
notebook until it clears the chamber.
Release
Figure 4-7 Removing the Battery Pack
83