Front Panel Leds - Keysight Technologies U5310A Startup Manual

Step 4: Install the Module

Front Panel LEDs

Indicator
DPU
STATUS
If warning or error status is observed, please try the following steps:
Power-cycle the PC (If using a PCIe expansion chassis, observe the power
sequence requirements).
If the error persists please contact Keysight technical support
sight.com/find/assist.
18
Purpose Color State
DPU status Off
Green, blinking
Green
White
Module White, blinking
status
Green, blinking
Yellow, blinking
Red, blinking
Green
Meaning
DPU is not configured
Module initialization in progress
Module OK (firmware not yet loaded)
DPU firmware loaded (ready)
Firmware initialization in progress
Module initialization in progress
Warning
Error
OK (ready)
http://www.key-
Keysight U5310A Startup Guide