Integra Xmart OPTIMA-T10 6K/10K User Manual page 29

14
15
16
17
www.xmart-ups.com
USER MANUAL – OPTIMA-T10 6K/10K (UL)
CHARGER VOLTAGE ADJUSTMENT:
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
Charger voltage can be adjusted
ADD: for increasing
SUB: for decreasing
Set values with keys:  & 
INVERTER VOLTAGE ADJUSTMENT:
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
Inverter output voltage can be adjusted
ADD: for increasing
SUB: for decreasing
Set values with keys:  & 
VOLTAGE OUTPUT VALUE ON LCD:
This function calibrates output voltage value indicated on LCD.
ADD: for increasing
SUB: for decreasing
Set values with keys:  & 
** THIS FUNCTION ONLY WORKS IF UPS IS CONNECTED IN PARALLEL.
CHARGER CURRENT ADJUSTMENT:
BOTTOM PARAMETER
Charging current can be selected: 1A/2A/3A/4A
Set value by keys:  & 
** NO MODIFICATIONS RECOMMENDED – ONLY BY TECHNICIANS **
This is used when additional external batteries are connected to UPS and charger current
needs to be increased to recharge in shorter time.
- UPS WITH STANDARD BATTERIES: 1A
- UPS WITH 1 ADDITIONAL EXTERNAL BATTERY PACK: 2A or 3A
- UPS WITH 2 ADDITIONAL EXTERNAL BATTERY PACKS: 4A
UPPER PARAMETER:
It allows to adjust real charger current. If charger current is selected as 1A but when it
is measured it is 0.7A, real current can be adjusting by adding +3 in this parameter.
VER.190731-GA2UL (ENG)
INDEX
29