Adjustment; Steering Friction; Throttle Grip Friction; Remote Control Lever Friction - TOHATSU MFS 40A Owner's Manual

62

ADJUSTMENT

ENOM00073-0

1. Steering friction

Tiller handle type
ENOW00074-A
Do not overtighten the steering friction lever
it could result in difficulty of movement
resulting in the loss of control causing an
accident and could lead to severe injury.
Adjust this lever to achieve the desired
steering friction (drag) on the tiller han-
dle. Move lever towards (A) to tighten
friction and move lever towards (B) to
loosen friction.
3
9
1. Steering friction lever
2. Lighter
3. Heavier
ENOM00074-A

2. Throttle grip friction

ENOW00074-B
Do not overtighten the throttle adjustment
screw or it could result in difficulty of move-
ment resulting in the loss of control causing
an accident and could lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjust-
WARNING
2
ENOF00910-0
WARNING
ment screw.
1
1. Throttle friction adjustment screw
2. Lighter
3. Heavier
ENOM00075-0

3. Remote control lever friction

ENOW00074-C
Do not over tighten the remote control
1
throttle friction adjustment screw or it
could result in difficult y of movement
resulting in the loss of control causing an
accident and could lead to severe injury.
To adjust the friction of the remote con-
trol lever, turn the throttle friction
adjustment screw on the front of the
remote control . Turn c lock wise to
increase the friction and counter-clock-
wise to decrease it.
3
2
ENOF00911-1
WARNING