TOHATSU MFS 40A Owner's Manual page 46

Hide thumbs Also See for MFS 40A:
Table of Contents

Advertisement

46
ENGINE OPERATION
ENOM00973-0
Neutral throttle button (Top
mount RC type)
ENOW00957-0
The control lever does not operate unless
the neutral lock arm is pulled.
The neutral throttle button is for warm-
up operation. (Not required for engine
starting) When the control lever is in
neutral, push and hold the neutral throt-
tle button. While holding the button,
move the lever forward to throttle up the
engine.
When the control lever is returned to the
neutral position, the button will reset
automatically.
7
2
1
1. Neutral throttle button
2. Forward
ENOM00
-0
Trolling engine speed control
function
If the main switch key is pressed for 1
(one) second during idling or trolling
operation, engine revolution change.
CAUTION
ENOF00935-0
ON
Each time the main switch key is pressed
in the above manner, engine speed
changes as follows.
Starting
-1
850min
(rpm)
750min
-1
950min
(rpm)
850min
Buzzer short sounded one time, when set
-1
to 650 min
(rpm) engine speed, and tells
the lowest engine speed was set.
Buzzer short sounded twice, when set to
-1
950 min
(rpm) engine speed, and tells
the highest engine speed was set.
Reset the engine speed when after
engine restarted and or engine speed is
-1
above 3,000 min
(rpm), and then trolling
engine speed to be 850 min
standard.
In addition, this function does not oper-
ate when battery voltage is lower than
specified, set engine idle and trolling
engine speed to 850 min
matically.
1
second
ENOF00876-0
-1
-1
(rpm)
650min
(rpm)
-1
-1
(rpm)
750min
(rpm)
-1
(rpm) as
-1
(rpm) auto-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 60aMfs 50a

Table of Contents