Amcrest IP8M-2496E User Manual page 61

•
The camera's local video output quality is not sufficient.
10. Network connection is not stable.
Below are a few possible reasons why this may be occurring
•
The network is not stable.
•
There may be an IP address conflict.
• There may be a MAC address conflict. •
defective.
11. The alarm signal cannot been disarmed.
Below are a few possible reasons why this may be occurring:
•
An alarm may be setup incorrectly.
•
An alarm output may have been manually opened.
•
There may be an error in the camera's firmware.
12. Alarms are not working.
Below are a few possible reasons why this may be occurring:
•
The alarm is not setup correctly.
•
The alarm cable is not connected correctly.
•
The alarm input signal is not correctly configured.
•
There are two loops connected to one alarm device.
13. The camera is not recording enough video.
Below are a few possible reasons why this may be occurring:
The storage capacity is not enough. The
storage device is damaged.
:
The PC or camera network card may be
61