Amcrest IP8M-2496E User Manual page 41

Below is an explanation of the fields on the Motion Detect tab: •
Enable: This checkbox enables motion detection for the camera.
•
Working Period: Clicking this button opens a weekly schedule that can be used to set times.
o
Click and drag to set motion detection for certain days of the week. Also, periods of motion detection
can be set for each day and enabled using the period settings on the bottom half of the screen. There
are a total of 6 periods that can be set.
•
Anti-Dither: This field allows the user to set the anti-dither time. The values in this field can range from 5 to 600
seconds. This time value controls how long the alarm signal lasts. Based on motion detection, a buzzer can go
off, a tour can begin, a snapshot can be taken, or the camera can begin recording.
o
For example, if the anti-dither time is set to 10 seconds, each alarm may last 10 seconds if the local
alarm is activated. During the process, if the system detects another local alarm signal at the fifth
second, the buzzer, tour, snapshot, record channel functions will begin another 10 seconds while the
screen prompt, alarm upload, email will not be activated again. After 10 seconds, if system detects
another alarm signal, it can generate a new alarm since the anti-dither time has expired.
•
Detection Area: Clicking this button opens a pop up screen that can be used to set detection areas.
41