Tektronix PRISM MPX2-DUALDSP Installation And Safety Instructions page 12

Important safety information
Do not operate without covers.
Hazardous voltage exposure is possible.
Avoid exposed circuitry.
Do not operate with suspected failures.
qualified service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged or operates incorrectly. If in doubt about safety of
the product, turn it off and disconnect the power cord. Clearly mark the product to prevent its further operation.
Before use, inspect test leads and accessories for mechanical damage and replace when damaged. Do not use test leads if
they are damaged, if there is exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions.
warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation.
so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise obstructed. Do not push objects
into any of the openings.
Provide a safe working environment.
and indicators.
Avoid improper or prolonged use of keyboards, pointers, and button pads. Improper or prolonged keyboard or pointer use
may result in serious injury.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional to avoid stress
injuries.
iv
Do not operate this product with covers or panels removed, or with the case open.
Do not touch exposed connections and components when power is present.
If you suspect that there is damage to this product, have it inspected by
Be aware that condensation may occur if a unit is moved from a cold to a
Remove the input signals before you clean the product.
Refer to the installation instructions in the manual for details on installing the product
Always place the product in a location convenient for viewing the display
PRISM MPX2-DUALDSP Installation and Safety Instructions