Download Print this page

Lanner NCA-5530 User Manual page 96

Advertisement

NCA-5530 User Manual
OS Watchdog Timer
OS Wtd Timer Timeout
OS Wtd Timer Policy
System Event Log
BMC network
configuration
View System Event Log
BMC Warm Reset
If enabled, it starts a BIOS timer which can only be shut
Enabled
off by Management Software after the OS loads. It also
Disabled
helps verify that the OS is successfully loaded or follows
the OS Boot Watchdog Timer policy.
5 minutes
10 minutes
Configure the length of the OS Boot Watchdog Timer.
15 minutes
Not available if OS Boot Watchdog Timer is disabled.
20 minutes
Do Nothing
Configure how the system should respond if the OS Boot
Reset
Watchdog Timer expires. Not available if OS Boot
Power Down
Watchdog Timer is disabled.
Power Cycle
Press <Enter> to change the SEL event log
NA
configuration.
NA
Configure BMC network parameters.
NA
Press <Enter> to view the System Event Log Records.
NA
Press <Enter> to do Warm Reset BMC.
96

Advertisement

loading

This manual is also suitable for:

Nca-5530aNca-5530bNca-5530c