Advertisement
NCA-5530 User Manual
This is packed along with the processor. Before
performing any assembly involving this part,
Processor
please locate
Carrier
important indicator used to align this carrier with
the processor and the bolster plate correctly.
This cover is used to protect the package land
surface of the processor from contamination. To
Socket
remove it from the processor, grasp the holding
Cover
features with your thumb and your index finger
while pulling the cover off vertically.
A robust bolster plate is used to assist in PHM
alignment for installation, while effectively helping
Bolster
eliminate PCB bowing during compression. Please
Plate
locate the
starting PHM installation.
1. With the processor in the shipping
tray, align the
PIN1
processor carrier to the
on the processor.
PIN1
on one of the corners, an
Cutout
on one of the four corners before
indicator on the
PIN1
marking
Align the
golden
fingers to
the PCIe
socket on
the
motherb
oard
carefully
while
inserting
this
module.
29
Advertisement
