Advertisement
NCA-5530 User Manual
NCA-5530 comes with an additional M.2 SSD memory card slot. Please follow the steps for installation.
1. Power off the system and open the
chassis cover
2. Locate
the
M.2
motherboard.
3. Align the notch of the M.2 memory
card with the socket key in the pin
slot.
4. Insert the M.2 memory card pins at
30 degrees into the socket until it is
fully seated.
5. Push down on the module and
secure it with a screw.
slot
on
the
4
5
38
2
3
Notch
Advertisement
