Advertisement
NCA-5530 User Manual
4. Mount the disk drive onto the
empty tray. Make sure the disk
drive's SATA contacts are facing
towards the inside the system.
5. Screw in the hard disk on both
sides (two (2) screws on each side).
6. Install the tray back to the original
position on the motherboard and
secure with the three (3) screws.
7. Connect the SATA cable and SATA
power cable to the hard disk.
SATA Contacts
5
40
4
SATA contacts
Screws
face this side
6
7
Advertisement
