Advertisement
NCA-5530 User Manual
2. And line up the two keying features
on the processor carrier.
3. Gently press on the each of the press
tabs at the top and bottom of the
carrier to engage the locking tabs
Note: During assembly, it is essential to have (1)PIN1 on the processor carrier aligned with the processor,
and (2) the alignment features on the top and the bottom of the processor aligned with the corresponding
carrier latches.
4. Push down on the two sides to
engage the side locking tabs. Check
to make sure all four locking tabs
have been attached to the processor.
30
Advertisement
