Advertisement
NCA-5530 User Manual
Feature
BMC Support
Wait For BMC
FRB-2 Timer
FRB-2 Timer timeout
FRB-2 Timer Policy
Options
Enabled
Enable or disables interfaces to communicate with BMC.
Disabled
Wait For BMC response for specified time out. In PILOTII,
BMC starts at the same time when BIOS starts during AC
Enabled
power ON. It takes around 30 seconds to initialize Host
Disabled
to BMC interfaces.
Enabled
Enables or disables FRB-2 timer (POST timer).
Disabled
3 minutes
4 minutes
Enter value Between 3 to 6 min for FRB-2 Timer
5 minutes
Expiration value.
6 minutes
Do Nothing
Reset
Configure how the system should respond if the FRB-2
Power Down
Timer expires. Not available if FRB-2 Timer is disabled.
Power Cycle
95
Description
Advertisement
