Table of Contents
Advertisement
8. Place the powerpack (optional equipment) against the
platform uprights, closest to the mast, and slide it down
until it clicks, indicating it is fully seated (see Figure 3-
12.).
Figure 3-12. Powerpack positioned and latched into
NOTE: When reversing the procedure to disassemble the
machine, pull the powerpack release latch (see Figure 3-
19.) while lifting to disengage the powerpack from the
platform.
LIFTPOD by JLG
place
SECTION 3 - MACHINE OPERATION
9. Tool tray: (optional equipment)
Place on top rail of platform, and fasten the two clips
firmly around the rail (see Figure 2-9.).
THE WEIGHT OF OBJECTS CARRIED IN A PLATFORM ACCESSORY,
ALONG WITH PERSONNEL AND EQUIPMENT PLACED IN THE PLATFORM
MUST NOT EXCEED THE MAXIMUM RATED PLATFORM CAPACITY. SEE
TABLE 5-4.
DO NOT PLACE ITEMS IN THE TOOL TRAY IN THE INDICATED AREA
WHEN MAST IS BELOW THE TOOL TRAY'S TOP SURFACE (SEE FIGURE
3-13.).
1001070465
3-9
Advertisement
Table of Contents
