Motherboard Installation - Supermicro X11DAC User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver
(1)
Tools Needed
JA1
JPS1
SAS Controller Chip
Location of Mounting Holes
Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (10)
BMC
X11DAC
REV:1.00
DESIGNED IN USA
BIOS LICENSE
Battery
PCH
SAS CODE
MAC CODE
JBT1
SAS4~7 SAS0~3
21
Chapter 2: Installation
Standoffs (10)
Only if Needed
USB3~4 LAN1/2 JAUDIO1 USB1~2/
PS2
VGA
CPU2
P2 DIMM A2
MAC CODE
CPU1
LE2
FAN2
JPI2C1
JF1
FAN1