Supermicro X11DAC User Manual page 90

Super X11DAC User's Manual
Server ME (Management Engine) Information

This feature displays the following system ME configuration settings.
•
Oper. (Operational) Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1/ME Firmware Status #2
•
Current State
•
Error Code
(PCH) SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enable and Disable.
Configure SATA as (Available when SATA Controller is set to Enable)
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID. (Note: This item is hidden when the SATA Controller item is set to Disabled.)
SATA HDD Unlock (Available when SATA Controller is set to Enable)
Select Enable to unlock SATA HDD password in the OS. The options are Enable and Disable.
SATA/sSATA RAID Boot Select (Available when Configure SATA as is set to RAID)
This feature allows the user to decide which controller should be used to boot the system.
The options are None, SATA Controller, sSATA Controller, and Both.
Aggressive Link Power Management
When this feature is set to Enable, the SATA AHCI controller manages the power use of the
SATA link. The controller will put the link in a low power mode during an extended period of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are Enable and Disable.
90