Supermicro X11DAC User Manual page 22

Super X11DAC User's Manual
Installing the Motherboard
1. Install the I/O shield into the back of the
chassis as needed.
2. Locate the mounting holes on the
motherboard as shown in the layout on
the left side.
3. Locate the matching mounting holes on the chassis. Align the mounting holes on the
motherboard against the mounting holes on the chassis.
4. Install standoffs in the chassis as needed.
5. Install the motherboard into the chassis carefully to avoid damaging other motherboard
components.
6. Using the Phillips screwdriver, insert a Phillips head #6 screw into a mounting hole on
the motherboard and its matching mounting hole on the chassis.
7. Repeat Step 5 to insert #6 screws into all mounting holes.
8. Make sure that the motherboard is securely placed in the chassis.
Note: Images displayed in this manual are for illustration only. Your system or com-
ponents might look different from those shown in this manual.
BMC
JA1
X11DAC
DESIGNED IN USA
BIOS LICENSE
Battery
PCH
SAS CODE
MAC CODE
JBT1
JPS1
SAS Controller Chip
SAS4~7 SAS0~3
22
USB3~4 LAN1/2 JAUDIO1 USB1~2/
PS2
VGA
REV:1.00
CPU2
P2 DIMM A2
MAC CODE
CPU1
JPI2C1
JF1
LE2
FAN2 FAN1