Supermicro X11DAC User Manual page 37

DIMM Installation
1. Follow the instructions listed in the
previous section to properly install the
DIMM modules in the motherboard. Use
memory modules of the same type and
speed on the motherboard for the system
to work properly.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press on both
ends of the module straight down into the
slot until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Module Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module
from the socket as shown in the drawing on
the right.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
BMC
JA1
BIOS LICENSE
PCH
JBT1
JPS1
SAS Controller Chip
SAS4~7 SAS0~3
Release Tabs
37
Chapter 2: Installation
USB3~4 LAN1/2 JAUDIO1 USB1~2/
PS2
VGA
X11DAC
REV:1.00
DESIGNED IN USA
Battery CPU2
P2 DIMM A2
MAC CODE
SAS CODE
MAC CODE
CPU1
JPI2C1
JF1
LE2
FAN2 FAN1
Notches
Press both ends
straight down into
the memory slot.