Supermicro X11DAC User Manual page 102

Super X11DAC User's Manual
RAM Disk Configuration
This feature allows the user to configure the settings for the RAM disks installed in the system.
When you select this submenu and press <Enter>, the following items will display:
•
Disk Memory Type: This feature specifies the type of memory that is available for you to
create a RAM disk. The options are Boot Service Data and Reserved.
Create Raw
This feature allows the user to create a raw RAM disk from all available memory modules in
the system. When you select this submenu and press <Enter>, the following items will display:
•
Size (Hex): Use this feature to set the size of the raw RAM disk. The default setting is 1.
•
Create & Exit: Select this feature when you want to exit from this submenu after you've
created a raw RAM disk.
•
Discard & Exit: Select this feature when you want to abandon the changes you've made
and to exit from the submenu.
Create from File
This feature allows the user to create a RAM disk from a file specified by the user. Select
this submenu and press <Enter>, the following items will display:
•
Create RAM Disk List: Use this feature to create a RAM disk list.
•
Remove Selected RAM Disk(s): Use this feature to delete the RAM disk(s) specified by
the user.
Intel® Optane® DC Persistent Memory Configuration

When you select this submenu and press <Enter>, the following screen will display:
•
Version: This feature displays the version of DCPMM used in the system.
•
Select an action below
•
Detected DIMMs: This feature displays the number of DCPMM memory modules detected
by the BOS.
•
All DIMMs are healthy (The health status of the DCPMM is displayed.)
102