Supermicro X11DAC User Manual page 11

Quick Reference Table
Jumper Description
JBT1 CMOS Clear
JPME1 ME Recovery
JPME2 Manufacturing Mode Select
JPS1 SAS Status
JWD1 Watch Dog Timer Enable
Connector Description
BT1 Onboard CMOS battery socket
COM2 COM header for front access
FAN1-6, FANA System cooling fan headers (FAN1-FAN6, FAN A)
SATA0~3, SATA4~7 SATA 3.0 connection headers supported by the Intel PCH
JA1 Audio header for front access
JD1 Internal speaker/Buzzer header
JF1 Front Control Panel header
Chassis Intrusion header (Note: please connect a cable from the Chassis Intrusion header at JL1
JL1
to the chassis to receive an alert via IPMI.)
JPI C1 Power Supply SMBus I
2
JPWR1/JPWR2 8-pin Power Supply connectors
JPWR3 24-pin ATX main power supply connector
VROC (JRK1) Intel VROC RAID Key header for NVMe Solid State Device (SSD)
JSPDIF_IN1/JSPDIF_
SPDIF (Sony/Philips Digital Interconnect Format) Audio In/Out headers
OUT1
JTPM1 Port 80 connector for Trusted Platform Module (TPM)
LAN1/LAN2 Dual 1GbE Ethernet ports on the IO back panel
SAS0~3 SAS Connections 0-3 supported by LSI SAS 3008 Controller
SAS4~7 SAS Connections 4-7 supported by LSI SAS 3008 Controller
SLOT1 PCIe 3.0 x16 Slot supported by CPU1
SLOT2 PCIe 3.0 x8 Slot supported by CPU1
SLOT3/SLOT5 PCIe 3.0 x16 Slots supported by CPU2
SLOT4/SLOT6 PCIe 3.0 x8 Slots supported by CPU2
T-SGPIO1/T-SGPIO2 General Purpose Serial I/O Port1/Port2
USB1/2,USB3/4 Back panel USB 3.0 Ports 1/2, 3/4
USB5/6 Front Accessible USB 3.0 header
VGA VGA Port
LED Description
DS1 SAS Heartbeat LED
LE2 Onboard Power LED
LEDM1 BMC Heartbeat LED
C header
2
Status
Blinking Green: SAS Normal
On: Onboard power on
Blinking Green: BMC normal
11
Chapter 1: Introduction
Default Setting
Open (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)