So, Hello - Circontrol Rapid Series Installation & User Manual

So, hello!

This manual provides commissioning and use instructions information about
Post eVolve Rapid, which has been designed and tested to allow electric
vehicle charging, specified in IEC 61851.
This document has different sections such as step-by-step installation
procedure and technical data.
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
ELECTRIC RISK
Take precautions to make the electrical connection inside the
unit. Unit must be disconnected from any power source during
commissioning.
ATTENTION!
Indicates that the damage to property can occur if appropiate
precautions are not taken.
• Compliant with IEC 61851; Electric vehicle conductive
charging system (IEC 61851-1 and IEC 61851-23).
• Compliant with IEC 62196; Plugs, sockets-outlets, vehicle
connectors and vehicle inlets- Conductive charging of
electric vehicles
• Directives: 2014/53/UE, Radio and Telecommunication
Terminal
Compatibility (EMC); 2014/35/UE, Low
• Meets the CCS specification, DIN SPEC 70121. ISO 15118
ready.
(IEC 62196-1, IEC 62196-2 and IEC 62196-3).
equipment; 2014/30/UE, Electromagnetic
Voltage.
03