Main Menu; Passwords To Access The Menus - Tecfluid CU Series Instruction Manual

4

MAIN MENU

To access the main menu of the converter, press the key (OK). The following screen
appears:
The "Installation" option allows the installation of the transducers, as explained in Chapter 5
of this manual.
The "Programming" option allows to program all parameters of the converter, as explained in
Chapter 6 of this manual.
From the "Reset totalizer" option, the user can return the totalizer to zero. When exiting the
menu, the totalizer will begin to accumulate again.
The options "Software Version" and "Serial Number" are informative and are discussed in
Chapters 7 and 8 of this manual.
4.1

Passwords to access the menus

To access the installation and programming menus, a password must be entered. At first
access, the default password is 0123.
The password for the installation menu may be different from the password for the program
menu. If you want to change any of these passwords, you must enter the corresponding
menu and once inside, access the submenu "Password".
To change the access password of
the installation
"Installation" on the main menu and
then "Password".
menu, select
12
Number of menu items
Selected item
To change the access password of
the programming
"Programming" in the main menu and
then "Password".
menu, select