General Equipment Specifications; Environmental Conditions - Bio Compression Systems SC-3004-DL Operating Instructions Manual

Sequential circulator

Hide thumbs Also See for SC-3004-DL:

Operating instructions manual (16 pages)

Table Of Contents

Table of Contents

GENERAL EQUIPMENT SPECIFICATIONS:

DIMENSIONS:

WEIGHT:

INFLATION:

DEFLATION:

CYCLE TIME:

ELECTRICAL:

APPLIED PART:

PROTECTION AGAINST

ELECTRICAL SHOCK

OPERATION MODE:

PROTECTION MODE AGAINST WATER: IP20

ENVIRONMENTAL CONDITIONS:

FOR OPERATION:

AMBIENT TEMPERATURE:

RELATIVE HUMIDITY:

ATMOSPHERIC PRESSURE:

FOR TRANSPORT AND STORAGE:

ATMOSPHERIC PRESSURE:

RELATIVE HUMIDITY:

ATMOSPHERIC PRESSURE:

SC-3004-DL

4.5" H x 11.75 W x 7.75" D

5.5 lbs

52 Seconds

8 Seconds

13 Seconds / Chambers

120 VAC, 60 Hz, 0.5 A

TYPE B

CLASS II

CONTINUOUS OPERATION

+50°F - +100°F (+10°C -+37.8°C)

30% - 75%

700hPa to 1060hPa

-20°F - + 110°F (10°C- +37.8°C)

30% - 75%

700hPa - 1060hPa

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Need help?

Do you have a question about the SC-3004-DL and is the answer not in the manual?

Questions and answers

Sandy Bethlenfalvy

April 27, 2025

All the pressure is not releasing from the boots when the machine is turned off. What is the problem?

1 comments:

Mr. Anderson

May 14, 2025

If the pressure is not releasing from the SC-3004-DL boots when the machine is turned off, possible causes include:

1. Garment not properly connected to the pump.
2. Damaged, kinked, or twisted garment hose.
3. Damaged garment.

Check these components and contact Bio Compression Systems if the issue persists.

This answer is automatically generated