INTENDED USE:
The Model SC-3004-DL Sequential Circulator is a pneumatic compression device
intended for either primary or adjunctive treatment of primary or secondary
lymphedema. The device is also intended for additional or alternate treatment of
venous insufficiency and chronic venous stasis ulcers associated with venous in-
sufficiency as well as general treatment for swelling of the extremities. The device
is intended for both home and hospital use.
Federal (USA) law restricts this device to sale by or on the order of a
physician
CONTRAINDICATIONS:
Compression IS NOT recommended in the following conditions:
Infections in the limb, including cellulitis without appropriate antibiotic
coverage
The presence of lymphangiosarcoma
Deep vein thrombosis (DVT)
Inflammatory phlebitis or episodes of pulmonary embolism
Congestive heart failure (CHF)
CAUTIONS AND PRECAUTIONS:
This device is not intended for use during SLEEP.
Pressure settings should not be changed unless ordered by a physician.
High pressure should be set with caution on patients with peripheral arterial
occlusive disease.
Caution must be exercised for patients with insensitive, irritated, sunburned,
bruised or broken skin, or with skin conditions such as skin cancer, dermatitis,
eczema, or psoriasis in/around treatment sites.
If skin develops blisters, redness, welts, discoloration or other noticeable
changes, or if burning, itching or increased swelling should occur, discontinue
use and consult with a physician's supervision.
Slip and fall hazard. To avoid the risk of tripping or falling, do not stand or
walk while wearing garments.
Tubing may present a STANGULATION HAZARD or restrict blood flow if it
becomes wrapped around a limb. Use caution and KEEP FROM CHILDREN.
Use only the garments, tubing and accessories provided for use with this
device.
Do not attempt to modify this device in any way.
4
Need help?
Do you have a question about the SC-3004-DL and is the answer not in the manual?
Questions and answers
All the pressure is not releasing from the boots when the machine is turned off. What is the problem?
If the pressure is not releasing from the SC-3004-DL boots when the machine is turned off, possible causes include:
1. Garment not properly connected to the pump.
2. Damaged, kinked, or twisted garment hose.
3. Damaged garment.
Check these components and contact Bio Compression Systems if the issue persists.
This answer is automatically generated