Texas Instruments ADS8350EVM-PDK User Manual page 13

www.ti.com
5.2.3 Install the ADS8350EVM-PDK Software
The ADS8350 EVM V#.#.# software must be installed on the PC. This software supports the
ADS8350EVM-PDK. The user must have administrator privileges to install the EVM software. The
following steps list the directions to install the software.
1. Open Windows explorer and find the microSD memory card in the browser as a storage device.
2. Navigate to the ...\ADS8350 EVM Vx.x.x\Volume\ folder.
3. Run the installer by right-clicking the setup.exe and selecting Run as Administrator. This action installs
the EVM GUI software and the required simple capture card device driver components.
4. After the installer begins, a welcome screen displays. Click Next to continue.
5. A prompt appears with the destination directory; select the default directory under: ...\Program
Files(x86)\Texas Instruments\ADS8350evm\, as shown in
Figure 10. Welcome Screen and Destination Directory Screens
6. One or more software license agreements appear. Select I Accept the License Agreement and click
Next.
7. The Start Installation screen appears, as shown in
Figure 11. License Agreement and Start Installation Screens
SBAU218A – April 2014 – Revised October 2014
Submit Documentation Feedback
Figure
Copyright © 2014, Texas Instruments Incorporated
ADS8350EVM-PDK Initial Setup
Figure 10.
11. Click Next.
ADS8350EVM-PDK
13