Installing Batteries - Lockly SECURE PRO Installation Manual

Step 6

INSTALLING BATTERIES

3: Once self-check completes ensure the lock operates smoothly by manually locking and
unlocking the door using the thumb turn on the interior assembly. The deadbolt should operate
smoothly without any interference or binding. If necessary, repeat step 2 and ensure that (a)
the deadbolt was extended and (b) the torque blade was inserted vertically while the deadbolt
was extended.
4: Swipe your hand across the touch screen
keypad, the lock should close (lock). If deadbolt
bounces back or unlocks automatically it means
something is not installed correctly. Go back and
repeat step 2, same as above.
5. Once self-check is complete, install battery
cover (H), secure with screw on top (do not over
tighten).
14