Table of Contents
Advertisement
XR1045
Introduction
General
This Operation and Safety Manual provides the
information needed to safely operate the XR1045
Reach Forklift
This manual should be considered a permanent part of
the forklift and kept in the plastic, protective case located
in the operator's cab
BEFORE operating the forklift, read this manual
completely and carefully to understand the safety
instructions and the operation of controls and safety
equipment. You must comply with all DANGER,
WARNING, and CAUTION notices. They are for
your benefit.
Warning
Improper operation of this forklift could result in
death or serious injury.
BEFORE starting the engine, do the following:
• Read this Operation and Safety Manual.
• Read all safety Labels on the forklift.
• Clear the area of other persons.
Learn and practice safe use of forklift controls in a safe,
clear area, BEFORE you operate this forklift on a work
site.
It is your responsibility to observe applicable laws and
regulations and to follow manufacturer's instructions
on forklift operation and maintenance.
Replacement manuals
Replacement manuals for the XR1045 Reach Forklifts can
be obtained by contacting:
Xtreme Manufacturing
Phone: (800) 497-1704
For information call (800) 497-1704
Notice
Notice
Model/Serial Number Plate
When contacting the manufacturer, please have the
forklift model and serial numbers available The model/
serial number plate is located on the left side, inside the
operator's cab
For easy reference, record the model and serial numbers in
the space provided
Model Number: __________________________________
Serial Number: ___________________________________
Figure 1-1. Model/Serial Number Plate.
Orientation
Right side, left side, front, and rear are directional
references given from the operator's seat while facing in a
forward direction
Figure 1-2. Forklift Direction Orientation.
Introduction
Page 3
Advertisement
Table of Contents
