Table of Contents
Advertisement
Operation
The rear axle lock indicator illuminates when the forklift
is in the axle lock mode The rear axle locks when the
parking brake is set to ON (engaged), the transmission is
in NEUTRAL or the service brake applied, and when the
boom is above 40°
If the rear axle lock indicator does not illuminate, stop
the forklift, follow proper shut down procedures, tag the
forklift with "Do Not Operate" tags, and have a qualified
mechanic service or repair the forklift before placing it
into service again
Figure 7-16. Rear Axle Lock Indicator.
Stopping Travel
1. Stop the forklift by applying the service brake pedal
2. Downshift the forklift to a lower gear, if necessary, to
slow the forklift until it comes to a complete stop
3. Move the travel select lever to NEUTRAL (N)
4. Set the parking brake to ON (engaged)
Warning
To prevent death, serious injury, or
property damage, apply service brakes
until the forklift comes to a complete stop,
move travel select lever to NEUTRAL (N),
set the Parking Brake switch to ON (engaged), lower
and retract the boom, and shut off the engine before
exiting the forklift.
Page 56
Changing Travel Direction
Warning
Make sure the forklift comes to a complete
stop before moving the travel select lever.
A sudden change in direction of travel,
while carrying a load, can reduce stability
and/or cause the load to shift or fall, which could result
in death, serious injury, or property damage.
1. Stop the forklift by applying the service brake
pedal If necessary, shift to a lower gear to help
slow the forklift
2. Move the travel select lever to FORWARD (F) or
REVERSE (R)
3. Release the service brake pedal
4. Slowly press the accelerator pedal to start travel
Shut Down Procedure
1. Park the forklift on level ground, if possible
2. Stop the forklift by applying the service brake pedal
3. Place the travel select lever in NEUTRAL (N) and set
the parking brake to ON (engaged)
4. Lower the boom and rest carriage on ground
5. Turn the ignition key to OFF and remove the key
6. If the forklift is parked on an incline, block the wheels
XR1045
Xtreme Manufacturing, LLC
Advertisement
Table of Contents
