Operator Cab; Ignition Switch; Accessory Outlet; Accelerator Pedal - Xtreme XR1045 Operation & Safety Manual

Operator Cab

Operator Cab
 Warning
A brief description of controls,
indicators, and instruments is provided
as a convenience for the operator.
These descriptions DO NOT provide
complete operation instructions. Read and under-
stand the entire manual to prevent death, serious
injury, or equipment damage.

Ignition Switch

A key is required to operate the Ignition switch
Figure 6-1. Key and Ignition Switch.
The Ignition switch has four (4) positions: OFF, RUN,
PREHEAT, and START
Table 5. Ignition Switch
Position Purpose
OFF Shuts down entire electrical system, except the horn
and accessory outlet
RUN All controls and indicators are operable
PREHEAT Use for cold starting conditions
START Engages starter motor to crank engine
NOTE: The PREHEAT and START positions are spring-
loaded When the key is released, the Ignition switch will
automatically return to the RUN position
Page 34
Figure 6-2. Ignition Switch.

Accessory Outlet

A 12 Volt accessory outlet is provided as a power source
for personal items, such as a radio or cell phone
Figure 6-3. Accessory Outlet.

Accelerator Pedal

Press the accelerator pedal to increase engine speed The
accelerator pedal is spring-loaded to return to idle speed
Figure 6-4. Accelerator Pedal.
XR1045
Xtreme Manufacturing, LLC