Table of Contents
Advertisement
Operator Cab
Fuel Gauge
The fuel gauge indicates the quantity of fuel in the fuel
tank The total capacity of the fuel tank is 48 gallons (180
liters)
Figure 6-25. Fuel Gauge.
Oil Gauge
The oil gauge indicates the engine oil pressure
Normal engine oil pressure readings should be between
40 and 80 PSI
If the oil gauge shows abnormal readings, stop the forklift,
follow proper shut down procedures, tag the forklift with
"Do Not Operate" tags, and have a qualified mechanic
service or repair the forklift BEFORE placing it into service
again
Figure 6-26. Oil Gauge.
Coolant Gauge
The coolant gauge indicates the temperature of the
coolant in the engine cooling system After starting the
forklift, allow time for the coolant temp gauge pointer
to begin to move before operating the forklift After the
engine has sufficiently warmed up, normal engine coolant
temperature should read between 180 to 200°F
Page 40
If the coolant gauge shows abnormal readings, stop the
forklift, follow proper shut down procedures, tag the
forklift with "Do Not Operate" tags, and have a qualified
mechanic service or repair the forklift BEFORE placing it
into service again
Figure 6-27. Coolant Gauge.
Light Switches
The Light Switches control two (2) front cab lights, two (2)
boom lights, and one (1 ) rear cab light Toggle the Light
Switches up (ON) or down (OFF)
Figure 6-28. Light Switches.
Turn Signal and Hazard Switches
The Turn Signal Switch controls the turn signals (toggle
left or right) The Hazard Light Switch flashes all four (4)
turn signals (toggle up or down)
Figure 6-29. Turn Signal and Hazard Light Switches.
XR1045
Xtreme Manufacturing, LLC
Advertisement
Table of Contents
