Restore Settings; Hmi Update; Restart Hmi; Fan Test - CanadianSolar CSI-185K-T600GL03-U Installation And Operation Manual

Csi grid-tied pv inverter
Table of Contents

Advertisement

7. Normal operation

7.5.9 Restore Settings

There are 5 items in initial setting submenu.
Restore setting could set all item in 7.5.7 special setting to default.
Thescreenshowsasbelow:
Are you sure?
YES=<ENT> NO=<ESC>
Figure 7.45 Restore Settings
PresstheEnterkeytosavethesettingaftersettinggridoff.
PresstheESCkeytoreturnthepreviousmean.

7.5.10 HMI Update

This section is applicable to maintenance personnel only.
Selecting "Updater" displays the sub-menu shown below:
HMI Current Ver.: 02
YES=<ENT> NO=<ESC>
Updater is for updating LCD firmware. Press the ENTER key to start the process.
Press the ESC key to return to the previous menu.

7.5.11 Restart HMI

ThefunctionisusedforrestarttheHMI.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
.54.
Figure 7.46
7. Normal operation

7.5.12 FAN Test

This section is applicable to maintenance personnel only.
Selecting "Fan Test" displays the sub-menu shown below:
YES=<ENT> NO=<ESC>
Fan Test is a factory test function. Press the ENTER key to start the test.
Press the ESC key to return to the previous menu.

7.5.13 DSP Update

The function is used for update the DSP.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.

7.5.14 Compensation Set

This function is used to calibrate inverter output energy and voltage. It will not impact the
energy count for inverter with RGM.
Two sections are included: Power Parameter and Voltage Parameter.
The screen shows:
YES=<ENT> NO=<ESC>
Power para:1.000
Figure 7.48 Power Rate Limit
Press the Down key to move the cursor. Press the Up key to change the digit. Please press
the Enter to save the setting and press the ESC key to return to the previous menu.
This setting is used for grid operators, do not change this setting unless
specifically instructed to.
Are you sure?
Figure 7.47
.55.

Advertisement

Table of Contents
loading

Table of Contents