Lock Screen; Settings; Set Time; Set Address - CanadianSolar CSI-185K-T600GL03-U Installation And Operation Manual

7. Normal operation
Display
Duration
Work Mode: Volt-watt
10 sec
DRM NO.:08
I_DC01: +00.0A
I_DC02: +00.0A
10 sec
...
I_DC28: +00.0A
V_DC01: +0000.0A
I_DC02: +00.00A
...
10 sec
V_DC14: +0000.0A
I_DC14: +00.00A
Table 7.2 Information list

7.2.1 Lock Screen

Pressing the ESC key returns to the Main Menu. Pressing the ENTER key locks
(Figure 7.2(a)) or unlocks (Figure 7.2 (b)) the screen.
(a)
Figure 7.2 Locks and Unlocks the Screen of LCD
.32.
Description
Work Mode: Shows current working mode.
DRM NO.: Shows DRM Number.
I_DC01 : Shows input 01 current value.
I_DC02 : Shows input 02 current value.
...
I_DC28 : Shows input 28 current value.
V_DC01 : Shows MPPT 01 current value.
I_DC01 : Shows MPPT 01 current value.
...
V_DC14 : Shows MPPT 14 current value.
I_DC14 : Shows MPPT 14 current value.
(b)
7. Normal operation

7.3 Settings

The following submenus are displayed when the Settings menu is selected:

1. Set Time

2. Set Address

7.3.1 Set Time
This function allows time and date setting. When this function is selected, the LCD will
display a screen as shown in Figure 7.3.
NEXT=<ENT> OK=<ESC>
01-01-2020 00:00
Figure 7.3 Set Time
Press the UP/DOWN keys to set time and data. Press the ENTER key to move from one
digit to the next (from left to right). Press the ESC key to save the settings and return to
the previous menu.
7.3.2 Set Address
This function is used to set the address when muti inverters are connected to three monitor.
The address number can be assigned from "01"to "99"(see Figure 7.4). The default address
number of Canadian Solar Three Phase Inverter is "01".
YES=<ENT> NO=<ESC>
Set Address: 01
Figure 7.4 Set Address
Press the UP/DOWN keys to set the address. Press the ENTER key to save the settings.
Press the ESC key to cancel the change and return to the previous menu.
.33.