Start & Stop; Start The Inverter; Stop The Inverter; Operation - CanadianSolar CSI Manual

Grid-tied pv inverter
Table of Contents

Advertisement

6. Start & Stop

6.1 Start the Inverter

To start up the Inverter, it is important that the following steps are strictly followed:
1. Switch the grid supply main Switch (AC) ON first.
2. Switch the DC switch ON. If the voltage of PV arrays are higher than start up voltage,
the inverter will initialize. The red LED power will light.
3. When both the DC and the AC sides supply to the inverter, it will be ready to generate
power. Initially, the inverter will check both its internal parameters and the parameters
of the AC grid, to ensure that they are within the acceptable limits. At the same time,
the green LED will flash and the LCD displays the information of INITIALIZING.
4. After 30-300 seconds (depending on local requirement), the inverter will start to
generate power. The green LED will be on continually and the LCD displays
GENERATING.
WARNING:
Do not touch the surface when the inverter is operating. It may be
hot and cause burns.

6.2 Stop the Inverter

To stop the Inverter, the following steps must be strictly followed:
1. Turn off the ac switch.
2. Put the DC SWITCH on the inverter in the position of "OFF".
.24.
In normal operation, LCD screen alternatively shows inverter power and operation status
(see Figure 7.1). The screen can be scrolled manually by pressing the UP/DOWN keys.
Pressing the ENTER key gives access to Main Menu.
Power
01-01-2019
5 sec
UP/DOWN or
Start
auto-scroll
(10 sec)
Status: Generating
01-01-2019
Pressing the
ENTER key
gives access to
the main menu.
Figure 7.1 Operation Overview

7.1 Main Menu

There are four submenus in the Main Menu (see Figure 7.1):

1. Information

2. Settings

3. Advanced Info.

4. Advanced Settings

7.2 Information
The Canadian Solar three Phase Inverter main menu provides access to operational
data and information. The information is displayed by selecting "Information" from the
menu and then by scrolling up or down.

7. Operation

Pressing the
Main Menu
ESC key
calls back the
previous menu.
Information
110000W
UP/DOWN
12:04
Settings
UP/DOWN
Advanced Info.
UP/DOWN
12:04
Advanced settings
.25.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents