Setup; Main Setup Menu Screen; Initial Setup - Graco BDS Instructions-Parts List Manual

Screen
BATCH
DISPENSE
SYSTEM
Run Recipe

Setup

Manual Cntl Scale Setup
Main Menu
Edit Existing Recipe
Edit Valve Parameters
Reports
Exit

Initial Setup

To initially setup the BDS system, you usually go
though the setup options in the following order:
1. System Setup
2. Edit Valve Parameters
3. Add Valve (if material needs to be added
manually)
4. Add Recipe
Other setup options are accessed and used as
needed.
26 309279
Setup
Clean Screen
Exit
Add Recipe
Add Valve
System Setup
How to Use
Setup
Press Setup to display the Main Setup Menu Screen.

Main Setup Menu Screen

Provides access to the following setup options:
Edit Existing Recipe (page 42)
provide the sequencing order for dispensing multiple
materials into a common tank. You can assign up to
1000 recipes in the database.
Edit Valve Parameters (page 36)
system valve variables. The batch dispense system
comes preconfigured for either 4, 12, or 20 automatic
valves. The valve variables are set with default values
at the factory.
Reports (page 44)
Sort and view various data-
base reports.
Add Recipe (page 40)
Existing Recipe, above, for more information.
Add Valve (page 38)
manual valves. A manual valve defines the manual
addition of specific materials into a recipe at a
prescribed amount. You can assign up to 1000
manual valves in the database. Manual valve
numbers are automatically assigned.
System Setup (page 27)
variables such as units of measurement and pass-
words.
Recipes
Set the
Setup recipes. See Edit
Establish setpoints for
Set system wide