Introduction; Operator Controls And Indicators - Graco BDS Instructions-Parts List Manual

Operator Controls And
Indicators
See figure 1 on page 7.
Operator Controls
All the Batch Dispense System's (BDS) operator
controls are on the door of the main cabinet. The
power switch (47) turns all power to the cabinet on or
off.
Pressing in the emergency stop (E-stop) button (7)
turns off all electrical and pneumatic outputs. During
normal operation, the E-stop button is pulled to the
"out" position.
Scale Platform
The scale platform (B) is typically located at the base
of the BDS. The platform surfaces are stainless steel
for easy cleaning. There are no operator controls on
the scale itself.
Display
The display (A) provides the operator interface for the
the Batch Dispense System. The display is a 10.4"
(264 mm) VGA 640 x 480 TFT Screen with Analog
Resistive touch input. The touch screen allows the
operator to access all necessary screens to run, edit
and add a recipe, edit valve parameters, perform scale
calibration, edit machine setup parameters, and man-
age reports by pressing selections displayed on the
screen.
Main Operating Screen
The Main Operating Screen has buttons that can be
pressed to access the following functions:
Run Recipe to dispense a recipe in automatic
mode.
Manual Cntrl to dispense material manually.
Setup to configure the system setup (including
passwords, units of measure, and user screens), add
and configure recipes and valves, and view and print
reports.
Scale Setup to select and calibrate the scale.
6 309279

Introduction

Clean Screen to inactivate the touch screen to
clean it.
Main Operating Screen
BATCH
DISPENSE
Run Recipe
Manual Cntl
Screen Navigation
The BDS screens have one or more of the following
elements to use to access or enter information:
D Button: press to access another screen.
D Arrow: press to view a list of options.
D Text Box: press to activate the box and place the
cursor in it so you can type information.
NOTE: You can press the Tab key on your keyboard to
move the cursor to the next field on the screen.
Select a Valve Name or Valve Number to Edit Parameters
Valve #:
Valve Name:
Valve #:
Valve Type:
Unit of Measure:
Specific Gravity:
Dispense Tolerance%:
VOC Content lbs/Gal:
Drop Time (milliseconds):
Circulate Interval (minutes):
Circulate Duration (minutes):
Minimum Flow Rate:
Maximum Flow Rate:
SYSTEM
Setup
Scale Setup
2
Valve Name:
Green
1
Automatic
Pounds
0.959
5
5.23
7
5
2
10
25
Add New Return to Main Menu
Clean Screen
Exit
Green
Arrow
Text
Box
Button