Graco BDS Instructions-Parts List Manual page 9

8. If a manual dispense is required, the operator is
prompted for the correct amount to dispense.
When the manual dispense is complete, the opera-
tor presses Continue Batch. The BDS verifies that
the correct amount was dispensed and then con-
tinues with the next step in the recipe.
A manual dispense is required at this
time. Please dispense material until the
actual value is equal to the setpoint.
Setpoint: XXX
Actual: XXX
Continue
Batch
9. Abort can be pressed on the Recipe Status
Screen at any time to stop a dispense at the step
currently running in the recipe.
10. When a dispense is complete or aborted, the
Dispense Complete Screen appears showing the
amount of material dispensed.
Introduction
11. The operator can view the batch report by pressing
Preview Report and print the report if desired. The
dispense data is also stored electronically for later
retrieval.
12. Pressing Main Menu will return the BDS to the
Main Operating Screen.
13. Once the batch is complete, the operator typically
removes the container from the platform and
agitates the material either manually or with a
power mixer.
DISPENSE COMPLETE
Dispensed XXX of (recipe name)
Preview
Report
Main Menu
309279 9