Nakayama MB7005 User Manual page 6

EN
Work Time
Content of
Maintenance
Check and tighten Bolts & Nuts
Check and add new engine oil
Clean and change engine oil
Check if there's oil leakage
Clean dirt, weeds, and oil stains
Solve problems
Adjust operating parts
Friction disk
Gears and bearings
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes signif-
icantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also
concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
6
After 8 Hours
Every Day First Month or
After 20 Hours


(First time)




WWW.NAKAYAMATOOLS.COM
After the first After the third
month or after 20 month or after
Hours 150 Hours
(Third time and
(Second time)
thereafter)
Every year or Every 2 years or
1.000 Hours 2.000 Hours

