Clean Boot The Computer - Intermec CK3X User Manual

Clean Boot the Computer

CK3R and CK3X Mobile Computer User Manual
4 Replace the battery and the handstrap.
5 Press the Power button and wait for the computer to boot. When
the cold boot is complete, the Home screen appears.
Caution: A clean boot erases the memory in the mobile computer,
including all applications and data files, with the exception of
those found in the Flash File Store, or any removable storage.
If the computer seems to be locked up, try cold booting it. If this
process does not work, use a clean boot to get the computer up and
running for further troubleshooting.
1 Press and hold the Power button for about 2 seconds to suspend
the computer.
2 Remove the battery pack from the back of the computer.
3 With a stylus, press the Reset button in the battery cavity.
4 Insert the battery pack into the computer and immediately press
and hold the Power button.
5 Continue to hold the Power button until the "Release IO Button"
prompt appears on the screen.
You will have to press two keys for the next part of this procedure.
Our example uses key 6 and key 9, but you can press
6 Release the button and the message "Enter first key in 20 seconds"
appears on the screen. Press 9 on the keypad.
7 The message "Enter second key in 6 seconds" appears on the screen.
Press 6 on the keypad.
8 The message "Reconfirm first key in 6 seconds" appears on the
screen. Press 9 again.
9 The message "Reconfirm second key in 6 seconds" appears on the
screen. Press 6 again.
10 The message "Cleanboot Confirmed" appears on the screen. The
computer starts the process of clean booting.
Chapter 5 — Troubleshoot and Maintain the Computer
any
two keys.
89