Intermec CK3X User Manual page 32

Chapter 1 — About the Computer Features
22
Predefined Mode
1D
1D and 2D Standard
1D and 2D Bright Environment In high ambient light, such as outdoors
1D and 2D Reflective Surface
1 Point the imager window at the bar code and hold the computer
steady a few inches from the label.
2 Press the Scan button or pull the scan handle trigger. The
illumination beam, laser pointer, or frame appear.
For near or close-in scanning distances of 30 cm (11.8 in) or less,
use the laser pointer as a guide and aim slightly to the right of the
center of the bar code. Make sure the illumination beam covers the
bar code you are trying to decode.
For standard and long range scanning distances of 30 cm (11.8 in)
or more, use the laser pointer as a guide and aim toward the middle
For Scanning
Only 1D labels.
(Default) All types of bar code labels.
in sunshine.
Glossy Labels.
CK3R and CK3X Mobile Computer User Manual